Aerospace
Flight hardware made from your drawing and your revision, with material traced to the mill.
- Brackets and fittings
- Sensor housings
- Actuator parts
Made to print. Held to 0.005 mm.
Truebore is a 22-machine CNC shop in Gardena. Send a STEP file and a drawing, get a quote back in 24 hours, and get your parts with the inspection report in the box.
- Tightest tolerance
- ±0.002
- Quote back in
- 24 hours
- Order size
- 1 to 5,000
Sample shop numbers
Six ways to make the part
Full capabilities 01
5-axis milling
- Tolerance
- ±0.005 mm
- Largest part
- 500 x 400 x 350 mm
- Lead time
- 10 to 15 days
3-axis milling
- Tolerance
- ±0.010 mm
- Largest part
- 1000 x 500 x 500 mm
- Lead time
- 7 to 10 days
Swiss turning
- Tolerance
- ±0.005 mm
- Largest part
- 32 mm bar, 300 mm long
- Lead time
- 10 to 15 days
CNC turning
- Tolerance
- ±0.010 mm
- Largest part
- 350 mm diameter, 600 mm long
- Lead time
- 7 to 10 days
Wire EDM
- Tolerance
- ±0.003 mm
- Largest part
- 400 x 300 x 200 mm
- Lead time
- 10 to 15 days
Surface grinding
- Tolerance
- ±0.002 mm
- Largest part
- 600 x 300 mm
- Lead time
- 5 to 7 days
Who we cut for
Medical devices
Instrument parts and fixtures in 316 stainless, titanium and PEEK, cleaned and bagged.
- Instrument parts
- Test fixtures
- Device prototypes
Robotics
End effectors, gearbox housings and shafts, with bearing fits that go together by hand.
- End effectors
- Gearbox housings
- Shafts and couplers
Motorsport
Short runs on short notice: uprights, spacers and manifolds between race weekends.
- Uprights and spacers
- Intake manifolds
- Billet brackets
Every lot ships with the numbers.
First-article inspection on every new part. CMM, height gauge and pin gauges on every lot, and the report rides in the box with the parts. Material certs and a certificate of conformance on request.
- ISO 9001:2015Quality system Sample
- AS9100DAerospace Sample
- ITAR registeredDefense work Sample
- Your NDASigned before you send files
Inspection report · TB-1042 rev BSample
| Feature | Nominal | Tolerance | Actual | Result |
|---|---|---|---|---|
| Bore | Ø22.000 | +0.005/0 | 22.003 | Pass |
| Hub | Ø32.00 | ±0.01 | 31.996 | Pass |
| Length | 40.00 | ±0.02 | 40.008 | Pass |
| Flange | 8.00 | ±0.02 | 7.991 | Pass |
| Position | 4x | Ø0.010 | 0.006 | Pass |
How a quote works
Send the file
A STEP or IGES model plus a PDF drawing with your tolerances. Need an NDA first? Tick the box and we send ours, or sign yours.
Get a quote in 24 hours
Price per part at three quantities, the lead time, and any change to the drawing that would cut the cost without hurting the part.
Parts with the report
New parts get a first article for your sign-off. Then the lot ships with the inspection report and certs in the box.
Have a drawing ready?
Upload it and watch the title block fill in as you go.